Troubleshooting; When This Type Of Copy Is Produced - Minolta Di250 Manual

Troubleshooting

6 Troubleshooting
6.1

When this type of copy is produced

Symptom
The image is too light.
The image is too dark.
Di250/Di350
Possible Cause
The exposure level for the
Auto Exposure mode is set
at "Lighter."
1074O108
The exposure level for the
Manual Exposure mode is
set at "Lighter."
You have been making
copies from a photo or an
original with a large dark
area.
The Toner Bottle has just
been replaced.
The message "Replenish
Toner." is shown on the
Touch Panel.
The paper is damp.
The exposure level for the
Auto Exposure mode is set
at "Darker."
1074O109
The exposure level for the
Manual Exposure mode is
set at "Darker."
The Original Glass surface is
dirty.
The original is not held tightly
against the Original Glass.
Action
Change the setting of "Auto
Exposure Level" of User's
Choice, see page 4-7.
Or, cancel the Auto
Exposure mode and select
Manual Exposure to adjust
the exposure level to obtain
a darker image,
see page 3-46.
Touch [Darker] as necessary
to obtain a darker image, see
page 4-20.
The copier needs more
toner. Replenish toner by
using Toner Replenisher of
Utility Mode, see page 4-20.
The copier needs more
toner.
Replenish toner by using
Toner Replenisher of Utility
Mode, see page 4-20.
Replace the Toner Bottle,
see page 5-11.
Change the paper, see page
5-1.
Change the setting of "Auto
Exposure Level" of User's
Choice, see page 4-7.
Or, cancel the Auto
Exposure mode and select
Manual Exposure to adjust
the exposure level to obtain
a lighter image,
see page 4-20.
Touch [Lighter] as necessary
to obtain a lighter image, see
page 4-20.
Wipe the Original Glass
clean with a soft dry cloth,
see page 7-10.
Place the original in position
so that it is held tightly
against the Original Glass,
see page 2-28.
6
6-1