Getting to Know Your Copier
Mode Check
By pressing the Mode Check key on the
control panel, you can either check for
or change or store the current settings.
l
When you touch [Exit] after having checked the currently set functions,
the Basic screen reappears.
l
To change a certain function, touch the corresponding key and then
make the necessary change.
l
To register the current settings, touch the [Job Mem Input] key and
then the Program register screen appears, see page 4-12.
Auto Panel Reset
If no key on the control panel is pressed within 60 sec. after a copy cycle
has been completed or copying settings made, the Auto Panel Reset
function is activated to return the copier to the default settings.
Useful Tip
The time for the copier to activate Auto Panel Reset can be selected.
The Auto Panel Reset function can even be disabled. For details, see
page 4-6.
Di250/Di350
2
1168P174CB
2-33