Precautions When Using A Finisher - Minolta Di250 Manual

2
Pos. Specification
Job Tray
10 Job Tray
Duplex Unit
11 Lock Release Lever
Drawer
12 Drawer
Finisher
13 Stapler Cover
14 Top Offset Tray
15 Elevator Tray
Mailbin Finisher
13 Stapler Cover
14 Top Offset Tray
15 Elevator Tray
16 Mail Bins

Precautions when Using a Finisher

WARNING
Ð
NEVER place an object under the Elevator Tray. Anything that is
placed under the Elevator Tray can interfere with the tray when it
lowers after a copy set has been fed into it, which results in a
malfunction.
2-14
Receives copied paper.
Use to open the Duplex Unit for clearing a misfed sheet of
paper.
Load the paper into these drawers. When the amount of
paper still available for use in the drawer becomes small,
the lamp of the drawer starts blinking red. When the paper
runs out, the lamp lights up red steadily. (This does not
apply to the Large Capacity Cabinet.
Open to replace the staple cartridge.
Receives plain paper or special paper fed out.
Receives sorted paper by shifting.
Open to replace the staple cartridge.
Receives plain paper or special paper fed out.
Receives sorted paper by shifting.
Receives copied paper fed out in finishing mode.
Elevator Tray
NEVER place an
object here
Getting to Know Your Copier
Di250/Di350
1166o223AA