Initial Steps . . .
4.2
Placing Originals on the Original Glass
Paper Originals and Transparent Originals
Lift the Original Cover by at least 15°.
1
Originals are not automatically detected at a cover angle of less
than 15°.
Place the original on the Original
2
Glass with the side to be copied
face down.
Align the rear left-hand corner of the
3
original with the arrow mark. Press
the rear edge of the original against
the Original Positioning Plate.
?
Is the original transparent?
Place a sheet of white paper of
Ü
the same size on the original.
4
Close the Original Cover.
Rev. /
Original Positioning Plate
Arrow mark
For transparent originals only
4
4-3