Placing Originals; Placing Originals On The Original Glass - Minolta EP2080 Operator's Manual

26

2. Placing Originals

Placing Originals on the Original Glass

Different methods are used to place the original depending on its type. Use the appropriate
procedure.
Sheet Originals
(Using plain paper or thick paper.)
Raise the Original Cover.
1
Place the original face down on the
2
Original Glass.
Align the rear left corner of the
3
original with the
Original Width Scale.
Gently lower the Original Cover.
4
1151O013AA
marker on the
1151O014AA
Highly Transparent Originals
(Using transparencies and translucent paper for
the original.)
Place the original in the same way as
1
the sheet originals.
Place a blank sheet of paper of the
2
same size over the original.
Gently lower the Original Cover.
3
NOTE
The original sizes that can be detected
in the Auto Paper Select Mode are
A3L, B4L, A4L, A4C, A5L.
When making copies from originals
other than the above, select the copy
paper size.
When using wrinkled or curled
originals, the original size might not be
detected correctly. So, select the copy
paper size and do not use the Auto
Paper Select Mode.
Copy Paper Size
1139O0070A
p. 34