3
3.2
Placing Originals
Placing Originals on the Glass
Different methods are used to place the original depending on its type.
Use the procedure appropriate for your original. If you are using a
duplexing document feeder, see page 3-7.
Sheet Originals
Using plain paper or originals not suitable for the document feeder.
1
Raise the original cover or
duplexing document feeder and
place the original face down on the
glass.
2
Align the rear left corner of the
original with the
width scale of the copier glass.
NOTES
è
To make an A3 Wide copy with a copier equipped with a duplexing
document feeder, align the rear left edge of the original with the
M (photo) mark on the length scale to avoid lost image,
see page 3-6.
è
To make copies using the Photo mode on a copier equipped with a
duplexing document feeder, align the rear left edge of the original with
the M (photo) mark on the length scale, see page 3-6.
3
Gently lower the original cover or duplexing document feeder.
3-4
marker on the
Making Copies
CF9001