Placing Originals; Placing Originals On The Glass - Minolta CF910 Manual

3-4

2. Placing Originals

Placing Originals on the Glass

Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a Duplexing Document Feeder, see p. 3-6
Sheet Originals
(Using plain paper or originals not suitable for the
document feeder)
Raise the Original Cover or Duplexing
1
Document Feeder and place the original face
down on the Glass.
Align the rear left corner of the original with
2
the marker on the Width Scale of the
copier glass.
NOTES
• To make an A3 Wide copy from an A3 original
on a copier equipped with a Duplexing
Document Feeder, align the rear left edge of
the original with the
Length Scale to avoid lost image.
• To make copies using the Photo mode on a
copier equipped with a Duplexing Document
Feeder, align the rear left edge of the original
with the (photo) mark on the Length Scale.
p. 3-4
Gently lower the Original Cover or
3
Duplexing Document Feeder.
1144O007AA
1144y001AA
(photo) mark on the
p. 3-4
Highly Transparent Originals
(Using transparencies and translucent paper for
the original)
Place the original in the same way as the
1
sheet originals.
Place a blank white sheet of paper of the
2
same size over the original.
Gently lower the Original Cover or
3
Duplexing Document Feeder.
1144O008AA