Table of Contents
Advertisement
This chapter gives you instructions on how to troubleshoot copier malfunctions by showing actual
examples.
1. When This Type of Copy is produced p. 128
2. The Copier is not functioning as designed p. 130
The image is too light.
The image is too dark.
The copy is blurry.
The copy has dark specks or spots.
The edge of the copy is dirty.
The image on the copy is not aligned properly.
The copy has lines.
The Touch Panel shows nothing.
The Start key does not light up green.
No copies are fed out when the Start key is pressed.
Control panel keys do not respond.
The copier is not activated when the Power Switch is turned ON.
Chapter 6
Troubleshooting
127
Advertisement
Table of Contents
