Copying Onto Transparent Films (Ohp Interleave) - Konica Minolta 7222 User Manual

Copying onto Transparent Films (OHP Interleave)

Use the OHP Interleave function in 1-1 or 2-1 mode to copy onto overhead projection
transparent films, and output a blank or copied interleaf sheet with each copied
transparent film.
In the Blank sheet interleaving mode, a blank interleaf sheet is output with each
transparent film to keep the film material from sticking together.
In the Copy sheet interleaving mode, a copied interleaf sheet is output with each
transparent film to provide reference during a presentation, a version for photocopying,
and a set for filing or inserting into a binder.
Specifications for OHP Interleave
❒ Transparent film source: Multi-sheet bypass tray
❒ Print quantity: 1
❒ Finisher functions cannot be used. The Stack mode is used automatically, and
printed sheets will be delivered to TRAY 1 in the machine with FS-114, or to
secondary (sub) tray in the machine with FS-113.
❒ AMS is automatically selected.
❒ Incompatible Conditions: APS, 1-2, 2-2, Sort, Staple, Punch, Group, Fold,
Fold&Stitch, E-SORT+Sort, E-SORT+Group, Mixed Original, Sheet/Cover
Insertion, Chapter, Booklet, Image Insert, Repeat
Original
1.
Insert a sheet of transparent film into the Multi-sheet bypass tray.
• Do not load transparent films into any tray other than the bypass tray.
• Specify the Bypass paper type as OHP sheet. See p. 3-24.
2.
When interleaf sheet is needed, load copy paper in any other tray to
match the size of transparent films.
9-16
Blank sheets
Transparent films
Blank Sheet Interleaving
Copied sheets
Transparent films
Copy Sheet Interleaving