2
To make copies from a book or magazine
An example for making two separate single-sided Letter C-size copies from an open Letter-size book is
described below.
Position the book face down onto the platen glass.
When positioning the document, position it so that the top is toward the rear of
the copier. In addition, align the center of the book with the book mark on the
document scale.
Touch [OrigÖ Copy], and then touch [Book].
Make sure that [Separation] is selected, and then touch [Enter].
Touch [Paper].
Select the drawer loaded with Letter C paper.
Make sure that the number of copies is set to "1".
Press the [START] key. The copy job appears in the job display.
Copying is performed in the order that the job was programmed.
2-8
1
1
2.2 Practical Copy Examples
2
Konica 8020/8031