Rear Panel Connections; Figure 3-2: Required Front Door Clearance; Figure 3-3: Model 3000Za2G Rear Panel - Teledyne 3000ZA2G Operating Instructions Manual

Installation 3000ZA2G
inside the instrument. The door latch is spring loaded and will swing
open when the button in the center of the latch (upper right corner) is
pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide). Allow clearance for the door to open in a 90-degree arc of radius
7.125 inches. See Figure 3-2.

Figure 3-2: Required Front Door Clearance

3.3 Rear Panel Connections

Figure 3-3 shows the Model 3000ZA2G rear panel. There are ports
for gas, power, and equipment interface. The Zero In and Span In ports
are not included on the standard model but are available as options.
Power Entry
Ventilation
Module w/ Fuse
RS-232 Port
Housing
50-Pin Equipment
Gas
Connector
Auto Cal Valves
Connections
(optional)

Figure 3-3: Model 3000ZA2G Rear Panel

Teledyne Analytical Instruments 16