Figure 3-1: Front Panel Of The Model 3000Ta-Xl-Eu; Figure 3-2: Required Front Door Clearance - Teledyne 3000TA-XL-EU Operating Instructions Manual

Installation 3000TA-XL-EU

Figure 3-1: Front Panel of the Model 3000TA-XL-EU

All operator controls, except the flow control needle valve, are
mounted on the control panel, which is hinged on the left edge and
doubles as the door that provides access to the sensor and cell block
inside the instrument. The door latch is spring loaded and will swing
open when the button in the center of the latch (upper right corner) is
pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide). Allow clearance for the door to open in a 90-degree arc of radius
7.125 inches. See Figure 3-2.

Figure 3-2: Required Front Door Clearance

Teledyne Analytical Instruments 20