The fax lets you scan a fax into its memory and send it sometime
later. This lets you take advantage of lower long-distance rates at
night, for example.
ACTION
DISPLAY
[DELAYED
TX
SET TIME
1
Place the document face down on the automatic document feeder
(ADF), and gently insert it until it stops.
2
Press
FUNCTION,
then
DELAYED TRANSMISSION,
and then SET. (The
current time is displayed.)
DB.AYED
FUNCTION
TRANSMISSION
SEr
-(F
II
I
I
11
~
3
Use the numeric buttons to enter the time at which you want to send
the fax. (Enter the time in 24-hour form:
10:00
p.m. would be
22:00,
for example).
4
Press SET.
SEr
E x : 0 0 0 0
mLAYED
TX
SET TIME
5
Enter the destination(s) you want to send the fax to. You can do this
by:
•
Pressing One-Touch Speed Dialing buttons (with the
FUNCTION
lamp off).
•
Pressing
CODED DIAL
and entering Coded Speed Dialing codes.
(Be sure to press
COOED DIAL
between each code.)
•
Using the numeric buttons to enter one destination only. (Be
sure to press
SET
after entering the number.)
6
Press SET.
SEr
5-12
Note
If MEMORY FULL is displayed while the document is being scanned,
the fax cannot be sent later.
Canon CFX-L4000 User's Guide