Using Group Dialing - Canon CFX-L4000 User Manual

Plain paper facsimile
Hide thumbs Also See for CFX-L4000:
Table of Contents

Advertisement

$PEED
DIALING
5-10
Using Group Dialing
1
Place the document face down on the fax, and gently insert it into the
automatic document feeder (ADF) until it stops.
2
Press the desired One-Touch Speed Dialing button(s) or enter the
Coded Speed Dialingcode(s), then press START/COPY.
START ICIJP'(
o
Here are some important points about Group Dialing:
If you make a mistake, or want to cancel the dialing, press STOP.
You can select several groups in a row. The fax will be sent to all
the numbers you select in the order you select them. You can also
include numbers stored for One-Touch Dialing or Coded Speed
Dialing.
Once you select a group, the fax will start scanning in five sec-
onds, even if you don't press START/COPY (ten seconds if you enter
multiple codes). So if you want to send to multiple destinations,
be sure to press the second Group Dialing, Coded Dialing, or One-
Touch Speed Dialing button within five seconds after pressing the
first, and press any subsequent buttons within ten seconds.
If you don't place the document into the automatic document
feeder (ADF), the fax will display SET DOCUIVIENT.
The fax can detect if a number is registered more than once (One-
Touch Speed Dialing button no. 10, for example), and sends the
document once only to that number.
Canon CFX-L4000 User's Guide

Advertisement

Table of Contents
loading

Table of Contents