Table of Contents
Advertisement
Special Features
SPEED
DIALING
1
Place the document face down on the fax, and gently insert it into the
automatic document feeder (ADF) until it stops.
2
Press CODED DIAL and use the numeric buttons to enter the desired
two-digit code (00-99). (You can enter several codes in a row by
pressing CODED DIAL between each code.) Thenpress START/COPY.
START/COPY
Ex:0000000·
Here are some important points about Coded Speed Dialing:
•
If you make a mistake, or want to cancel the dialing, press STOP.
•
You can enter multiple Coded Speed Dial codes and also include
One-Touch Speed Dial buttons
(01-20)~'The
fax will automatically
be sent in numerical order to the Coded Speed Dial numbers first,
then to the OnE:!-Touch Speed Dial numbers.
•
Once you enter a two-digit code, the fax will start scanning in five
seconds, even if you don't press START/COPY (ten seconds if you
enter multiple codes). So if you want to send to multiple destina-
tions, be sure to enter the second Coded Speed Dialing code
within five seconds after entering the first, and subsequent codes
within ten seconds..
•
If you don't first place the document into the automatic document
feeder (ADF), the fax will display SET DOCUMENT.
•
If no number is stored under the button you press, the fax will
display NO TEL
#.
5-7
en
-a
m
n
);
r-
"TI
m
!i
c:
=
m
en
Advertisement
Table of Contents
