Table of Contents
Advertisement
FAX/TEL Auto.
Switch ..
Group Dialing
manual receiving
manual sending
memory broadcast
memory list
memory sending
One-Touch
Speed Dialing
PAUSE
polling
Glossary
GLOSSARY
This feature automatically detects whether.a call is from a faxmachine or a·
telephone. If the call is from a fax machine, the fax is automatically received;
if the call is from a telephone, the fax rings and you can answer the call using
the handset. This feature allows the fax to use a single line for both fax and
phone calls, and also enables you to use these variations:
•
Ring back tone: When using FAXffEL switching, it takes the fax a few
seconds to switch to the phone. During those seconds, the fax sends an
artificial ring back tone to the caller.
•
Silent reception: The fax receives faxes without ringing.
Allows you to dial up to
119 One-Touch Speed Dialing or Coded Speed
Dialing numbers at once.
A method of receiving faxes in which you answer all incoming calls using the
handset, and receive faxes by pressing START/COPY and then hanging up the
handset.
A method of sending faxes in which you dial the number, you speak with the
other party and then press START/COPY to begin sending the document. Use
manual sending if the memory is full, but you still want to send a document.
Manual sending scans and sends one page at a time. The document is not
scanned into the memory, so it takes a little more time to get your original
document back.
Allows you to send a scanned fax to as many as
121 locations at once, using
a combination of One-Touch Speed Dialing, Coded Speed Dialing, or regular
dialing.
Shows the faxes stored in the fax's memory, along with the following
information for each:
•
Transaction number
•
How the fax was stored
•
Name and number the fax was sent to (for One-Touch Speed Dialing or
Coded Speed Dialing)
•
Number of pages
•
Date and time each document was stored in the memory and when it will
be sent
•
Any errors that occurred when sending the document
A method of sending faxes in which you scan the document into the memory
before the fax dials the number and sends the fax. Compare manual sending.
Allows you to dial a fax number by pressing a single One-Touch Speed
Dialing button. The fax can store up to
20 fax numbers for Coded Speed
Dialing.
Pressing the PAUSE button enters a pause between digits of a telephone
number.
One fax machine requesting another to send a document. The receiving
party calls the fax machine holding the document to be sent, and requests
that it be sent.
6-3
Advertisement
Table of Contents
