Table of Contents
Advertisement
.,~. ~-
.'
,.
'-~".'
auto halftone
automatic dialing
automatic image
reduction
automatic redialing
bps
Coded Speed Dialing
delayed transmission
document
document density
dual access
ECM
6-2
",
Auto halftone automatically distinguishes between the text areas and
halftone areas (photographs, etc.) of a document, and scans accordingly. For
text areas of a document, the fax scans faster, and for halftone areas, it scans
more precisely.
However, if the ground color of the document is dark, the transmission speed
will be slower.
Dialing numbers at the press of one or a few buttons. To use automatic
dialing, you must register the numbers in the fax's memory. The fax has
three types of automatic dialing:
•
One-Touch Speed Dialing: Allows you to dial by pressing a single button.
•
Coded Speed Dialing: Allows you to dial by pressing the CODED DIAL button
and then entering a two-digit code.
•
Group Dialing: Allows you to dial a group of numbers stored under a One-
Touch Speed Dialing button or a Coded Speed Dialing code.
The fax can print the date, time, company name, and a fax number at the top
of the faxes it receives. To prevent this information from crowding the faxed
image off the page and onto the next (thus possibly lengthening the fax), the
fax automatically reduces the size of the image on the page.
When the receiving fax machine is busy or does not answer, or when an
error occurs while sending, the fax waits
2
minutes and then automatically
redials the number. If the receiving fax is still busy or doesn't answer, the fax
waits another two minutes and dials again. If the fax doesn't go through
again, the fax prints an activity report.
Bits per second. Refers to the speed with which a fax machine sends and
receives data.
Allows you to dial a fax number by pressing the CODED DIAL button and
entering a two-digit code. The fax can store up to
100 fax numbers for
Coded Speed Dialing.
The fax can scan in a document for sending to one or more numbers at a
later, preset time.
The sheet of paper that you want to send through the fax.
The lightness or darkness of the faxes, which can be controlled through the
fax's settings.
Enables the fax to receive a fax, even if it is already copying or printing. Also
enables you to load other faxes into memory, make copies, print out reports,
print documents or register information while the fax sends a fax from
memory.
Error Correction Mode. Reduces system and line errors when sending or
receiving from fax machines that have ECM capability. When using ECM, the
fax checks each page of incoming or outgoing faxes for lost data; when it
finds data that has been lost from a portion of a page, the fax transmits that
portion again after confirming that all data within that portion can be trans-
mitted successfully.
Canon CFX-L4000 User's
Guide
Advertisement
Table of Contents
