Advanced Setup - ZyXEL Communications AMG1302-T series User Manual

Table 11 Network Setting > Broadband > Internet Connection (continued)
LABEL
WAN Identifier Type
WAN Identifier
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Apply
Cancel

Advanced Setup

6.2.1 Advanced Setup
Use this screen to edit your AMG1302/AMG1202-TSeries's advanced WAN settings. Click the
Advanced Setup button in the Internet Connection screen. The screen appears as shown.
Figure 21 Network Setting > Broadband > Internet Connection: Advanced Setup
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Select Manual to manually enter a WAN Identifier as the interface ID to identify the
WAN interface. The WAN Identifier is appended to the IPv6 address prefix to create
the routable global IPv6 address. Select EUI64 to use the EUI-64 format to generate
an interface ID from the MAC address of the WAN interface.
If you selected Manual, enter the WAN Identifier in this field. The WAN identifier
should be unique and 64 bits in hexadecimal form. Every 16 bit block should be
separated by a colon as in XXXX:XXXX:XXXX:XXXX where X is a hexadecimal
character. Blocks of zeros can be represented with double colons as in
XXXX:XXXX::XXXX.
Select Keep Alive when you want your connection up all the time. The AMG1302/
AMG1202-TSeries will try to bring up the connection automatically if it is
disconnected.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced WAN Setup screen and edit more details of your
WAN setup. Click this button again to display less fields in this screen.
Chapter 6 Broadband
79