Configuring Port Binding - ZyXEL Communications AMG1302-T series User Manual

Chapter 4 Tutorials
Configured WAN connections can be viewed by clicking the More Connections tab under Network
Setting > Broadband. See the WAN Setup chapter
on configuring WAN connections and ATM QoS settings.

4.9.2 Configuring Port Binding

You can then group specific WAN PVCs with LAN ports or WLANs, so traffic from these ports is
forwarded through specific WAN PVCs. In the configuration shown below, the WAN connections set
up in the previous section are bound as follows:
Table 9 Port Binding Groups
GROUP INDEX
0
1
2
Access the port binding screen by clicking Network Setting > Port Binding, and select Activated
1
Port Binding to turn on the port binding feature.
Click the Port Binding tab, specify the Group Index and select the ports to include in the port
2
binding group. Click Apply.
58
WAN CONNECTION
PVC0 - for Data
PVC1 - for VoIP
PVC2 - for MOD
(Chapter 6 on page 73) for more information
LAN PORT
eth1, eth2, AP0
eth3
eth4
AMG1302/AMG1202-TSeries User's Guide