ZyXEL Communications AMG1302-T series User Manual page 229

Figure 121 Maintenance > RemoteMGMT > SNMP
The following table describes the labels in this screen.
Table 88 Maintenance > RemoteMGMT > SNMP
LABEL
Server Port
Server Access
Secured Client IP
Address
Get Community
Set Community
Apply
Cancel
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Select the interface(s) through which a computer may access the AMG1302/AMG1202-
TSeries using this service.
A secured client is a "trusted" computer that is allowed to access the SNMP agent on the
AMG1302/AMG1202-TSeries.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the AMG1302/AMG1202-TSeries using this service.
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Click Apply to save your changes back to the AMG1302/AMG1202-TSeries.
Click Cancel to begin configuring this screen afresh.
Chapter 25 Remote Management
229