ZyXEL Communications AMG1302-T series User Manual page 210

Chapter 21 TR-069 Client
Figure 105 Maintenance > TR-069 Client
The following table describes the fields in this screen.
Table 80 Maintenance > TR-069 Client
LINK
CWMP
ACS URL
ACS User Name
ACS Password
Connection
Request Path
Connection
Request Port
Connection
Request
UserName
Connection
Request
Password
Inform
Inform Interval
210
DESCRIPTION
Select Enable to allow the AMG1302/AMG1202-TSeries to be managed by a management
server or select Disable to not allow the AMG1302/AMG1202-TSeries to be managed by a
management server.
Type the IP address or domain name of the management server. If the AMG1302/AMG1202-
TSeries is behind a NAT router that assigns it a private IP address, you will have to
configure a NAT port forwarding rule on the NAT router.
The user name is used to authenticate the AMG1302/AMG1202-TSeries when making a
connection to the management server. This user name on the management server and the
AMG1302/AMG1202-TSeries must be the same. Type a user name of up to 255 printable
characters found on an English-language keyboard. Spaces and characters such as
@#$%^&*()_+ are allowed.
The password is used to authenticate the AMG1302/AMG1202-TSeries when making a
connection to the management server. This password on the management server and the
AMG1302/AMG1202-TSeries must be the same. Type a password of up to 255 printable
characters found on an English-language keyboard.
Type the IP address or domain name of the AMG1302/AMG1202-TSeries. The management
server uses this path to verify the AMG1302/AMG1202-TSeries.
The default port for access to the AMG1302/AMG1202-TSeries from the management server
is port 7547. If you change it, make sure it does not conflict with another port on your
network and it is recommended to use a port number above 1024 (not a commonly used
port). The management server should use this port to connect to the AMG1302/AMG1202-
TSeries. You may need to alter your NAT port forwarding rules if they were already
configured.
The user name is used to authenticate the management server when connecting to the
AMG1302/AMG1202-TSeries. Type a user name of up to 255 printable characters found on
an English-language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.
The password is used to authenticate the management server when connecting to the
AMG1302/AMG1202-TSeries. Type a password of up to 255 printable characters found on an
English-language keyboard. Spaces are not allowed.
Select Enable to have the AMG1302/AMG1202-TSeries periodically send information to the
management server (recommended if CWMP is enabled) or select Disable to not have the
AMG1302/AMG1202-TSeries periodically send information to the management server
The interval is the duration in seconds for which the AMG1302/AMG1202-TSeries must
attempt to connect with the management server to send information and check for
configuration updates. Enter a value between 1 and 86400 seconds.
AMG1302/AMG1202-TSeries User's Guide