Setting Up A Secure Wireless Network; Configuring The Wireless Network Settings - ZyXEL Communications AMG1302-T series User Manual

Chapter 4 Tutorials
In the Network Setting > Broadband screen's IPv6 Address configuration section, select
Obtain an IP Address Automatically. In the DHCP IPv6 field select DHCP to obtain an IPv6
address from a DHCPv6 server. In the DHCP PD field select Enable to have the AMG1302/
AMG1202-TSeries pass the WAN prefix to LAN hosts. The LAN hosts can then use the prefix to
generate their IPv6 addresses.

4.4 Setting Up a Secure Wireless Network

Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the AMG1302/AMG1202-TSeries serves as an access point (AP), and the
notebook is the wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the AMG1302/AMG1202-TSeries. Then he
can set up a wireless network using WPS
(Section 4.4.3 on page

4.4.1 Configuring the Wireless Network Settings

This example uses the following parameters to set up a wireless network. In the client, choose the
AP with the SSID configured here. When prompted for a key, use the Pre-Shared Key configured
here.
SSID
Security Mode
Pre-Shared Key
802.11 Mode
40
IPv6
(Section 4.4.2 on page
45).
SecureWirelessNetwork
WPA2-PSK
DoNotStealMyWirelessNetwork
802.11b+g+n
IPv6
IPv6
41) or manual configuration
AMG1302/AMG1202-TSeries User's Guide