Static Route; Chapter 9 Static Route; Overview - ZyXEL Communications AMG1302-T series User Manual

9.1 Overview

The AMG1302/AMG1202-TSeries usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the AMG1302/AMG1202-TSeries send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the AMG1302/AMG1202-TSeries's
LAN interface. The AMG1302/AMG1202-TSeries routes most traffic from A to the Internet through
the AMG1302/AMG1202-TSeries's default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2. You create another static route to communicate with
a separate network behind a router R3 connected to the LAN.
Figure 54 Example of Static Routing Topology
A
R3
AMG1302/AMG1202-TSeries User's Guide
LAN
WAN
C
H A PT ER

Static Route

R1
R2
9
135