Configuring The Lan Ip Alias Screen; The Ipv6 Lan Setup Screen - ZyXEL Communications AMG1302-T series User Manual

When you use IP alias, you can also configure firewall rules to control access to the LAN's logical
network (subnet).

8.5.1 Configuring the LAN IP Alias Screen

Use this screen to change your AMG1302/AMG1202-TSeries's IP alias settings. Click Network
Setting > Home Networking > IP Alias to open the following screen.
Figure 51 Network Setting > Home Networking > IP Alias
The following table describes the labels in this screen.
Table 34 Network Setting > Home Networking > IP Alias
LABEL
IP Alias
IP Address
IP Subnet Mask
Apply
Cancel

8.6 The IPv6 LAN Setup Screen

Use this screen to configure the IPv6 settings for your AMG1302/AMG1202-TSeries's LAN interface.
See Appendix E on page 295
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Select Enable to configure a LAN network for the AMG1302/AMG1202-TSeries.
Enter the IP address of your AMG1302/AMG1202-TSeries in dotted decimal notation.
Your AMG1302/AMG1202-TSeries will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the AMG1302/AMG1202-TSeries.
Click this to save your changes.
Click this to restore your previously saved settings.
for background information about IPv6.
Chapter 8 Home Networking
127