ZyXEL Communications AMG1302-T series User Manual page 260

Appendix A Setting up Your Computer's IP Address
Figure 149 Macintosh OS X: Network
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your AMG1302/AMG1202-TSeries in the Router address box.
Click Apply Now and close the window.
5
Turn on your AMG1302/AMG1202-TSeries and restart your computer (if prompted).
6
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.
260
AMG1302/AMG1202-TSeries User's Guide