The Nat Screen - ZyXEL Communications AMG1302-T series User Manual

Table 77 System Monitor > Traffic Status > LAN (continued)
LABEL
Data
Error
Drop
Received (Packet)
Data
Error
Drop

19.4 The NAT Screen

Click System Monitor > Traffic Status > NAT to open the following screen. You can view the NAT
status of the AMG1302/AMG1202-TSeries's client(s) in this screen.
Figure 102 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 78 System Monitor > Traffic Status > NAT
LABEL
Refresh Interval
Set Interval
Stop
Device Name
IP Address
MAC Address
No. of Open
Session
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
This indicates the number of transmitted packets on this interface.
This indicates the number of frames with errors transmitted on this interface.
This indicates the number of outgoing packets dropped on this interface.
This indicates the number of received packets on this interface.
This indicates the number of frames with errors received on this interface.
This indicates the number of received packets dropped on this interface.
DESCRIPTION
Select how often you want the AMG1302/AMG1202-TSeries to update this screen from the
drop-down list box.
Click this button to apply the new poll interval you entered in the Refresh Interval field.
Click Stop to stop refreshing statistics.
This shows the name of the client.
This shows the IP address of the client.
This shows the MAC address of the client.
This shows the number of NAT sessions used by the client.
Chapter 19 Traffic Status
205