Troubleshooting; Chapter 27 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications AMG1302-T series User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• AMG1302/AMG1202-TSeries Access and Login
• Internet Access
27.1 Power, Hardware Connections, and LEDs
The AMG1302/AMG1202-TSeries does not turn on. None of the LEDs turn on.
Make sure the AMG1302/AMG1202-TSeries is turned on.
1
Make sure you are using the power adaptor or cord included with the AMG1302/AMG1202-TSeries.
2
Make sure the power adaptor or cord is connected to the AMG1302/AMG1202-TSeries and plugged
3
in to an appropriate power source. Make sure the power source is turned on.
Turn the AMG1302/AMG1202-TSeries off and on.
4
If the problem continues, contact the vendor.
5
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED.
1
LABEL
WPS LED
WIFI LED
Check the hardware connections.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
AMG1302/AMG1202-TSeries User's Guide
C
HAPTER
DESCRIPTION
Green: successful connection
Off: connection failure
Green: WIFI active
Off: WIFI inactive

Troubleshooting

Section 1.5 on page 17
2 7
239