ZyXEL Communications AMG1302-T series User Manual page 155

Figure 69 Network Setting > NAT > Port Forwarding: Add/Edit
The following table describes the fields in this screen.
Table 50 Network Setting > NAT > Port Forwarding: Edit
LABEL
Active
Service Name
External Start
Port
External End Port
Server IP
Address
Trigger Protocol
Open Start Port
Open End Port
Back
Apply
Cancel
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Click this check box to enable the rule.
Enter a name to identify this port-forwarding rule.
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port field.
To forward a series of ports, enter the start port number here and the end port number in
the End Port field.
Enter a port number in this field.
To forward only one port, enter the port number in the Start Port field above and then
enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the Start Port field above.
Enter the IP address of the server in your local network.
Select the protocol of the service, TCP, UDP or ALL (TCP+UDP).
Enter the first port number here to which you want the device to translate the incoming
port. For a range of ports, you only need to enter the first number of the range to which
you want the incoming ports translated, the device automatically calculates the last port of
the translated port range.
Enter the last port number here to which you want the device to translate the incoming
port. For a range of ports, you only need to enter the first number of the range to which
you want the incoming ports translated, the device automatically calculates the last port of
the translated port range.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 11 Network Address Translation (NAT)
155