Broadband; Overview; What You Can Do In The Wan Screens; What You Need To Know About Wan - ZyXEL Communications AMG1302-T series User Manual

Wireless n/n-lite adsl2+ 4-port gateway
Hide thumbs Also See for AMG1302-T series:
Table of Contents

Advertisement

6.1 Overview

This chapter describes the AMG1302/AMG1202-TSeries's Broadband screens. Use these screens to
configure your AMG1302/AMG1202-TSeries for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks (such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
Figure 18 LAN and WAN
LAN

6.1.1 What You Can Do in the WAN Screens

• Use the Internet Connection screen
the AMG1302/AMG1202-TSeries for Internet access.
• Use the More Connections screen
connections.

6.1.2 What You Need to Know About WAN

Encapsulation Method
Encapsulation is used to include data from an upper layer protocol into a lower layer protocol. To set
up a WAN connection to the Internet, you need to use the same encapsulation method used by your
ISP (Internet Service Provider). If your ISP offers a dial-up Internet connection using PPPoE (PPP
over Ethernet) or PPPoA, they should also provide a username and password (and service name)
for user authentication.
WAN IP Address
The WAN IP address is an IP address for the AMG1302/AMG1202-TSeries, which makes it accessible
from an outside network. It is used by the AMG1302/AMG1202-TSeries to communicate with other
AMG1302/AMG1202-TSeries User's Guide
C
H A PT ER
WAN
(Section 6.2 on page
74) to configure the WAN settings on
(Section 6.3 on page
81) to set up additional Internet access
6

Broadband

73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amg1202-t series

Table of Contents