System Settings; Chapter 22 System Settings; Overview; What You Can Do In The System Settings Screens - ZyXEL Communications AMG1302-T series User Manual

22.1 Overview

This chapter shows you how to configure system related settings, such as system time, password,
name, the domain name and the inactivity timeout interval.

22.1.1 What You Can Do in the System Settings Screens

• Use the System screen
• Use the Time Setting screen

22.2 The System Screen

Use this screen to configure system admin password.
Click Maintenance > System to open the screen as shown.
Figure 106 Maintenance > System
The following table describes the labels in this screen.
Table 81 Maintenance > System
LABEL
Administrator
Inactivity Timer
Apply
Cancel

22.3 The Time Screen

Use this screen to configure the AMG1302/AMG1202-TSeries's time based on your local time zone.
To change your AMG1302/AMG1202-TSeries's time and date, click Maintenance > System >
Time Setting. The screen appears as shown.
AMG1302/AMG1202-TSeries User's Guide
C
(Section 22.2 on page
(Section 22.3 on page
DESCRIPTION
Type how many seconds a management session (either via the web configurator) can be
left idle before the session times out and you have to log in again. Very long idle timeouts
may have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Click this to save your changes.
Click this to restore your previously saved settings.
HAPTER

System Settings

213) to configure system settings.
213) to set the system time.
2 2
213