Figure 11 Internet Connection with PPPoA
The following table describes the fields in this screen.
Table 5 Internet Connection with PPPoA
LABEL
Encapsulation
User Name
Password
Multiplex
VPI
VCI
IP Address
Primary DNS
Server
Secondary
DNS Server
Back
Apply
Exit
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Select the encapsulation type your ISP uses from the Encapsulation
drop-down list box: IPoA, ENET ENCAP, PPPoA, or PPPoE.
Enter the login name that your ISP gives you.
Enter the password associated with the user name above.
Select the multiplexing method used by your ISP from the Multiplex
drop-down list box either VC-based or LLC-based.
Enter the Virtual Path Identifier (VPI) assigned to you. This field may
already be configured.
Enter the Virtual Channel Identifier (VCI) assigned to you. This field may
already be configured.
Enter the IP address of the AMG1302/AMG1202-TSeries.
Enter the primary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Enter the secondary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to close the wizard screen without saving.
Chapter 3 Internet / Wireless Setup Wizard
33