ZyXEL Communications AMG1302-T series User Manual page 34

Chapter 3 Internet / Wireless Setup Wizard
Figure 12 Internet Connection with PPPoE
The following table describes the fields in this screen.
Table 6 Internet Connection with PPPoE
LABEL
User Name
Password
Multiplex
VPI
VCI
Select Yes to enter specific IP information from your Internet service provider.
your Internet access information exactly as your service provider gave it to you.
IP Address
Primary DNS
Server
Secondary
DNS Server
Back
Apply
Exit
• If the user name and/or password you entered for PPPoE or PPPoA connection are not
correct, you are prompted to enter the correct information.
34
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name in
the form user@domain where domain identifies a service name, then enter
both components exactly as given.
Enter the password associated with the user name above.
Select the multiplexing method used by your ISP from the Multiplex drop-
down list box either VC-based or LLC-based.
Enter the Virtual Path Identifier (VPI) assigned to you. This field may
already be configured.
Enter the Virtual Channel Identifier (VCI) assigned to you. This field may
already be configured.
Enter the IP address of the AMG1302/AMG1202-TSeries.
Enter the primary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Enter the secondary DNS server IP address for the AMG1302/AMG1202-
TSeries.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to close the wizard screen without saving.
Enter
AMG1302/AMG1202-TSeries User's Guide