The Rules Add Screen - ZyXEL Communications AMG1302-T series User Manual

Table 62 Security > Firewall > Rules
LABEL
Destination Interface
Modify
Apply
Cancel

15.4.1 The Rules Add Screen

Use this screen to configure firewall rules. In the Rules screen, select an index number and click
Add or click a rule's Edit icon to display this screen and refer to the following table for information
on the labels.
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
This column displays the destination interface to which this firewall rule applies. This
is the interface through which the traffic is destined to leave the AMG1302/
AMG1202-TSeries. Please note that a blank source interface is equivalent to Any.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays asking
you to confirm that you want to delete the firewall rule. Note that subsequent firewall
rules move up by one when you take this action.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 15 Firewall
179