Amg1302/Amg1202-Tseries Access And Login - ZyXEL Communications AMG1302-T series User Manual

Chapter 27 Troubleshooting
Turn the AMG1302/AMG1202-TSeries off and on.
4
If the problem continues, contact the vendor.
5

27.2 AMG1302/AMG1202-TSeries Access and Login

I forgot the IP address for the AMG1302/AMG1202-TSeries.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the AMG1302/
2
AMG1202-TSeries by looking up the IP address of the default gateway for your computer. To do this
in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP
address of the Default Gateway might be the IP address of the AMG1302/AMG1202-TSeries (it
depends on the network), so enter this IP address in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
19.
I forgot the password.
The default admin user name and password can be found on the cover of this User's Guide.
1
If this does not work, you have to reset the device to its factory defaults. See
2
19.
I cannot see or access the Login screen for the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the AMG1302/AMG1202-TSeries.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled. See
240
(Section 8.2 on page
Appendix C on page 273.
Section 1.7 on page
Section 1.7 on page
123), use the new IP address.
AMG1302/AMG1202-TSeries User's Guide
I