Recovering A Call On Hold; Account Code - Siemens HiPath 1100 User Manual

Step by step

Recovering a call on hold

This feature allows you to retrieve a call on hold because
the destination number was busy.
Once the call is resumed, the destination is disconnect-
ed.
Required: A consultation was completed and the desti-
nation is busy.
d
( )
With standard MF telephones, first press the Flash key.
qd
Enter the code for resuming a call on hold.
w
Wait for the call to be answered.
s
Proceed with the conversation.

Account code

External calls can be assigned account codes which
provide more control over telephone costs. This infor-
mation may be presented on the billing ticket. A ac-
count code is specified by a sequence of up to 10 ran-
dom digits (0...9). For example, the number of a lawsuit.
If account codes have not been configured in advance
using HiPath 1100 Manager (See account codes -
A31003-K1270-M100-*), only ten-digit account codes
will be accepted in analog and S
wise, the call will not be completed.
Required: Account codes must already be defined and
the system's support technician must have defined the
mode in which the feature works.
External outgoing calls
n
Lift the handset.
qjd
Dial the code to enter with the account code.
p
Enter the account code (a sequence of up to 10 digits
from 0 to 9).
[1] This information may or may not appear on the billing ticket (see
Programming manual - call detail report Manager - Ticket account
code in the Ticket)
You do not require an account code to dial emergency numbers.
When a "External line reservation" is made, the account code will
be stored to be used automatically later when the "reserve" calls
back.
Functions used during calls
1
telephones. Other-
0
37