Deflecting A Waiting Call; Connecting A Caller; Transfer A Second Call; Putting Second Call On Hold - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
>
Deflect call?
Dial?
>
Join?
>
Transfer?
Dial?
>
Hold?
26

Deflecting a Waiting Call

You can deflect a waiting call to another phone number.
You hear the call waiting signal and the number of the
waiting party is displayed.
:
Select "Deflect call" and confirm.
>
o
Enter the destination telephone number.
:
Confirm your entry.
>
The first party connection is displayed again. The de-
flected call is stored in the Missed Calls list.

Connecting a caller

Prerequisite: You have answered the second call
( page 25).
:
Select and confirm. The party on hold and the second
>
caller are connected. You can now replace the handset
or redial.

Transfer a second call

You can transfer the second call to a third party.
Prerequisite: You have answered the second call
( page 25).
:
Select and confirm.
>
o
Enter the number of the third party to whom the se-
cond call is to be transfered.
:
Confirm.
>
The call is transferred immediately to the third party.
You are connected to the first party again

Putting second call on hold

If you have taken a second call, you can also place it on
hold, e.g. in order to consult with someone in the same
room. In this case both parties are put on hold.
Prerequisite: You have answered the second call
( page 25).
:
Select and confirm. The second call is held.
>