Functions used during calls
Step by step
36
Suffix dialing
Suffix dialing allows an extension to send information or
MF commands during a call (e.g: for telebanking).
Required: A call in progress on a dial tone telephone or
an attendant console.
qig
Enter the code for suffix dialing.
p
Enter the information requested by the answering ser-
vice.
w
Wait for a confirmation tone.
t
When the consultation is completed, replace the hand-
set.
Flash on analog trunk
The Flash on external Line feature allows the caller to
send a flash signal when making an external call (e.g.:
Master PABX commands).
Required: An external call must be in progress.
d
(
)
With standard MF telephones, first press the Flash key.
qie
Enter the code for sending a flash signal over an analog
external line.
s
Proceed according to the instructions provided by the
accessed system.
[1] This feature differentiates the numbers entered from system ser-
vice numbers.
This feature is not needed when using a MF telephone. All you
need to do is follow the auto-answering prompts.
1