Activating Receipt Of An Internal Mwi - Siemens HiPath 1100 User Manual

Step by step

Activating receipt of an Internal MWI

When a subscriber group is programmed as a VMIe
group Interface, it becomes a voice mail subscriber
group that can be activated for signaling the moment a
new message is waiting (see Programming an exten-
sion - VMIe group Interface in the programming manu-
al). This is the only group with permission to deactivate
the internal MWI.
To enable
n
Lift the handset.
qjl
Enter the code to enable the internal MWI.
w
Wait for a confirmation tone.
p
Enter the extension number assigned to the mailbox
(e.g., 12/102).
t
Replace the handset.
To deactivate
n
Lift the handset.
rjl
Enter the code to deactivate the internal MWI.
p
Enter the extension number assigned to the mailbox
(e.g., 12/102).
w
Wait for a confirmation tone.
t
Replace the handset.
[1] When all mailboxes of the Internal voice mail system are busy, the
call is forwarded to the UCD subscriber group queue assigned to
voice mail.
Remember: It is not possible to transfer calls to the voice mail sys-
tem.
Functions used for receiving calls
1
49