Using A Group Of External Lines - Siemens HiPath 1100 User Manual

Step by step
p
Enter the extension number (e.g. 11/101).
w
Wait for the call to be answered.
s
Start conversation.
• External calls:
p
Enter the external number you want to call.
w s
Wait for the call to be answered. Start conversation.
For DC telephones, dial a programmable code.
Consult technical support.

Using a group of external lines

An extension can make external call or calls to a Master
PABX through a group of external lines.
n
Lift the handset.
p
Enter the number for the appropriate group of external
lines: 0, 890...899.
w
Wait for a dial tone.
p
Enter the external number you want to call.
w
Wait for the call to be answered.
s
Start conversation.
... When a group is busy
If an overflow group was configured when the system
was programmed, the call is made using a second
group of external lines.
The second group of external lines takes into account
the extension's class of service.
[1] When operating as a Satellite PABX for external calls or for calling
extensions of a Master PABX, select the group of external lines be-
fore selecting the second external access code (0...9 or 00...99).
Or, select the extension number, as appropriate (see Important
Programming Data - Assigning groups of External Lines to Exten-
sions in the Programming manual). When a group of external lines
is configured as a Satellite PBX, a false dial tone is not generated.
Overflow group for External Lines (see Programming manual. Pro-
gramming an external Line - Overflow for a group of external lines
Functions used when making calls
1
13