Parking - Siemens HiPath 1100 User Manual

Step by step

Parking

The parking feature can place up to 10 internal or exter-
nal calls on hold and answer these at any extension.
Required: A call must be in progress.
d
( )
With standard MF telephones, first press the Flash key.
qij
Enter the code for parking.
d m
...
Select a parking slot
(e.g., 0).
w
Wait for a confirmation tone.
t
Replace the handset.
Recovering a parked call
n
Lift the handset.
rij
Enter the code to retrieve a parked call.
d m
...
Select the parking slot you want to answer (e.g., 0).
w
Wait for the call to be answered.
s
Start conversation.
Recovering a parked external call
An external call placed on hold using the "General park-
ing" feature in a telephone system can be retrieved on
any extension that has access to the same external line.
Required: An external call must be placed on hold in a
known external line.
n
Lift the handset.
qjg
Enter the code to retrieve the call.
p
Enter the number of the external line where the call is
parked (for example: 801).
s
Start conversation.
[1] If the slot selected is busy, a rejection tone is heard.
If a call that was placed on parking is not recovered after a specified
timeout, it is sent back to the originating extension.
1
Functions used during calls
35