Handsfree Answerback - Siemens HiPath 1100 User Manual

Functions used when making calls
Step by step
22
qld
Enter the code for direct messaging.
p
Enter an extension or Call group (CG).
s
Record the message.
Answer the call
n
or
Lift the handset or press the MUTE key.
s
Start conversation.

Handsfree answerback

The called extension receives an Alert tone. The call us-
ing the speakerphone is established immediately after
this tone is received.
Required: A system telephone with a speakerphone at
the destination number.
To enable
n
Lift the handset.
qmj
Enter the code to enable the answering mode.
w
Wait for a confirmation tone.
t
Replace the handset.
To deactivate
n
Lift the handset.
rmj
Enter the code to deactivate the answering mode.
w
Wait for a confirmation tone.
t
Replace the handset.
[1] This feature must be activated by the destination number during
programming (see Programming an extension - Auto-answering
mode, in the Programming manual).
1