Answering Calls With The Trunk Keys; Dialing With Trunk Keys; Placing A Call On Hold On A Trunk Key And Retrieving The Held Call - Siemens OpenStage 60T User Manual

Step by Step
if nec.
if nec.
\
Making calls in the team/executive/secretary configuration

Answering calls with the trunk keys

Prerequisite: You can see an incoming call on a trunk.
T
Press the trunk key that is flashing quickly.
(only if Prime Line ! page 134 is not active).
^
Lift the handset.
or Speakerphone mode.

Dialing with trunk keys

S
Select a line (only if Prime Line ! page 134 is not ac-
tive).
j
Enter the station number.
^
Lift the handset.
or Speakerphone mode.
Placing a call on hold on a trunk key and
retrieving the held call
Prerequisite: You are conducting a call via one of your
group's trunks. The "Hold" key has been programmed
on your telephone ! page 87.
Hold
S
Press the "Hold" key.
if nec.
s
or
Replace the handset or press the key shown.
Depending on the configuration (contact your service
personnel), this may be necessary so other team mem-
bers can also pick up the call on hold.
Retrieving the call
T
Press the trunk key flashing slowly.
135