Remote Configuration; Using An Mf Telephone - Siemens HiPath 1100 User Manual

Step by step
qmme
qmi

Remote configuration

The remote configuration feature allows remote config-
uration of the HiPath 1100.

Using an MF Telephone

Required: The programming extension must have a con-
versation in progress with the remote programmer.
w
With a conversation in progress enter the programming
extension code to transfer control of the HiPath 1100 to
the remote programmer.
w
p
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
To set the required configuration, proceed as if the re-
mote telephone were locally connected to the system.
If there is a DID installed
If the system is equipped with a Fax/DID module pro-
grammed as an external line DID.
w
Enter the code using a remote MF telephone after the
call is answered.
w
p
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
To set the required configuration, proceed as if the re-
mote telephone were locally connected to the system.
If an external programmer does not carry out the
programming within a specified time period, the
remote configuration process times out.
[1] If the system's serial port is connected to a modem with access to
the telephone network, and the remote PC has a modem installed,
remote configuration can be carried out using the HiPath 1100 Sys-
tem Manager application. Ask your support technician how to do
this.
Miscellaneous functions
1
77