External; When There Is No Answer - Siemens HiPath 1100 User Manual

Functions used for receiving calls
Step by step
42
w
Wait for a confirmation tone.
t
Replace the handset.

External

The external call forwarding feature allows calls made to
a specific extension to be forwarded to an external
number.
n
Lift the handset.
qee
Enter the code for external call forwarding.
p
Enter the number for accessing an external line:
1. For example, 0;
2. A group of external lines (e.g., 890).
w
Wait for a dial tone.
p
Enter the number you want to call.
w
Wait for a confirmation tone.
t
Replace the handset.

When there is no answer

The call forward no answer feature allows rerouting a
call made to a specific extension to another extension,
a voice mail subscriber group or an external number, af-
ter a specified timeout that can be pre-programmed or
if busy.
n
Lift the handset.
qeh
Enter the code for internal call forwarding.
[1] Call forwarding on an analog line times out after 5 minutes of con-
versation. Call forwarding does not take place when the external
destination number is busy. When a call is forwarded by the inter-
nal entrance telephone, it is disconnected after 1 minute of conver-
sation.
When Call Deflection is available, an incoming call to an extension
activated for call forwarding (*11) will be forwarded over the public
network, directly to an external destination.
[2] The call rings at the destination extension until the preset timeout
expires (see Programming manual, Programming an extension -
call forward no answer) or is forwarded immediately if busy.
1
2