Activating/Disabling A General Alarm; Disabling A General Alarm - Siemens HiPath 1100 User Manual

Step by step
qmheh
To deactivate
rmd
Enter the code to deactivate the relay.
p
Enter the system password at the remote telephone
(the default is: 31994).
w
Wait for a confirmation tone.
t
Replace the handset.

Activating/Disabling a General alarm

If the support technician configured the alarm feature
for your extension, it will ring whenever there is an
alarm condition on the HiPath 1100.
Answer the call to acknowledge that the alarm was de-
tected. If the alarm call is not acknowledged, a new at-
tempt at a call will be made (as programmed) and the
extension will ring again.
Required: The display shows "CALL: RLA CHK..."and
your telephone will ring three times (three short beeps)
at 4-second intervals.
n
Lift the handset.
t
Replace the handset.

Disabling a General alarm

If an alarm system has been activated, in addition to the
alarm signal, it can be deactivated.
n
Lift the handset.
Enter the code to deactivate a general alarm.
p
Enter the access code (default is 31994).
w
Wait for a confirmation tone.
t
Replace handset.
Miscellaneous functions
67