Warmline; Calling An Attendant Console (Ac) - Siemens HiPath 1100 User Manual

Step by step

Warmline

Warmline is the length of time the extension should
wait to call the first number configured as a Hotline. As-
suming the timeout is 9 seconds, the call will be made
9 seconds after the handset is lifted. However, if during
the 9 second time interval a key is pressed on the
phone keypad, the call to the Hotline will be canceled.
Each extension can have a different timeout for enabling
a Hotline. This timeout may vary from 0 to 9 seconds.
n
Lift the handset.
w
Wait for the call to be answered.
s
Start conversation.

Calling an attendant console (AC)

An attendant console can be called at any time for mak-
ing a call or simply for consultation.
n
Lift the handset.
m
Enter the code for calling the attendant console.
w
Wait for the call to be answered.
s
Start conversation.
Direct communication call
This features enables voice messages to be sent to
Profiset 3030 telephones using the speakerphone. A
message can be sent to an extension or a Call group
(CG)
When a message is sent, the called party hears a warn-
ing signal before the message is played and the display
shows the caller's name and number.
Required: Destination number uses a Profiset 3030 or an
optiPoint with a speakerphone telephone.
[1] Extensions configured to use the Warmline function are able to dial
all other internal or external numbers, as well as receive calls as
usual (see Programming an extension - Warmline in the Program-
ming manual).
[2] When no extension is programmed as an attendant and "9" is en-
tered, a busy signal is heard.
Functions used when making calls
1
2
21