Callback - Siemens HiPath 1100 User Manual

Functions used when making calls
Step by step
18

Callback

Recall allows a call to be made automatically (via an
ISDN line) to an extension or an external line that is not
available at a certain time as soon as it becomes avail-
able.
Required: The destination number is not available.
Callback due to no answer/busy
d
( )
With standard MF telephones, first press the Flash key.
5 8 Enter the code to confirm the recall.
*
w
Wait for a confirmation tone.
t
Replace the handset.
w
Wait for the recall.
If Recall If has been deactivated during configura-
tion, do the following to enable it
w
Wait 7 s
Wait 7 seconds until you hear a distinctive tone.
t
Replace the handset.
w
Wait for the recall.
Answering a recall
<< >>
The telephone rings (a distinctive ring).
n
Lift the handset.
w
Wait for the call to be answered.
s
Start conversation.
[1] Extension is busy - the system generates a recall as soon as a line
is available.
Extension is free - the system generates a recall once the caller has
returned to the station and made a call.
External number is busy - The system generates a recall as soon
as the destination number is free. This feature must be activated
by the carrier and the system needs to have a S
Only one recall can be activated for each extension. A new recall
cancels the previous one.
[2] (See enabling recall/urgent call with timeout, in the programming
manual)
1
2
module installed.
0