Igmp Filtering Profile - ZyXEL Communications MGS-3712F User Manual

Chapter 24 Multicast

24.5 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients
connected to the Switch are able to join. A profile contains a range of multicast IP
addresses which you want clients to be able to join. Profiles are assigned to ports
(in the Multicast Setting screen). Clients connected to those ports are then able
to join the multicast groups specified in the profile. Each port can be assigned a
single profile. A profile can be assigned to multiple ports.
Click Advanced Applications > Multicast > Multicast Setting > IGMP
Filtering Profile link to display the screen as shown.
Figure 108 Advanced Application > Multicast > Multicast Setting > IGMP Filtering
Profile
The following table describes the labels in this screen.
Table 62 Advanced Application > Multicast > Multicast Setting > IGMP Filtering
Profile
LABEL
Profile Name
Start Address
End Address
212
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already
added, enter the profile name and specify a different IP multicast
address range.
Type the starting multicast IP address for a range of multicast IP
addresses that you want to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that
you want to belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the
Start Address and End Address fields.
MGS-3712/MGS-3712F User's Guide