Spanning Tree Protocol Status Screen - ZyXEL Communications MGS-3712F User Manual

and single spanning tree devices. A network may contain multiple MST regions
and other network segments running RSTP.
Figure 70 MSTP and Legacy RSTP Network Example

13.2 Spanning Tree Protocol Status Screen

The Spanning Tree Protocol status screen changes depending on what standard
you choose to implement on your network. Click Advanced Application >
Spanning Tree Protocol to see the screen as shown.
Figure 71 Advanced Application > Spanning Tree Protocol
This screen differs depending on which STP mode (RSTP, MRSTP or MSTP) you
configure on the Switch. This screen is described in detail in the section that
follows the configuration section for each STP mode. Click Configuration to
activate one of the STP standards on the Switch.
MGS-3712/MGS-3712F User's Guide
Chapter 13 Spanning Tree Protocol
131