ZyXEL Communications MGS-3712F User Manual page 149

Table 33 Advanced Application > Bandwidth Control (continued)
LABEL
Peak
Rate
Active
Egress Rate
Apply
Cancel
MGS-3712/MGS-3712F User's Guide
DESCRIPTION
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the incoming traffic flow on a port.
Select this check box to activate egress rate limits on this port.
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to reset the fields.
Chapter 14 Bandwidth Control
149